Automotive Reviews

It's no "fluke" that the John C. Fluke Corp consistently puts out quality test instruments that have superior value and usability. This is no exception. Fluke was the first to offer 3200-count digital multi-meters when everyone else had 1999-count (3.5 digits). They were also the first with an analog bar-graph in addition to the 3200-count digital readout -- the fast-update bar-graph is a must for fast-changing readings or peaking/nulling adjustments.

The model 111 has 6000-count digits which update 4 times per second and a 33-segment bar-graph that updates 40 times per second.

I love the min/max/avg functions, being able to check capacitors, ac frequency, ac current from 5Hz to 50kHz, dc current, resistance, continuity, etc. I don't leave home without it!

[...]

this is a must have for cleaning wheels. I have some fairly compicated rims & a car that is infamous for brake dust problems. this product wipes away the brake dust as fast as I can brush over it. im a bit suspect of the 'lifetime waranty' as the brisles are getting warn. I will buy another one.

Re Oxygen Sensor Wrench Set #27110
This has got to be one of the best specialty tool deals I've ever seen. At $15.00, even with shipping added, you can't lose. Consider: Even if you drive your vehicle "until the wheels fall off," you will probably not change the O2 sensor more than once or twice. The first time you do--the first time you venture to try doing it yourself--you are almost sure to find: that a mere 22mm open-end wrench just can't be fit in over the sensor's wrench flats (say, if your sensor intalls in the crossover); and that a box wrench will not fit over the connector even if it is the right size; or that when you go looking for a 22mm split-type box wrench that will slip over the wires, finding that wrench in the 22mm size is difficult to impossible. Then, you are faced with finding the specific tool that will work with your particular vehicle; and paying $35 or more (even $100 or more) for that single application tool. But what if you change vehicles?...then there's a good chance your pricey tool will no longer be suited. With the #27110 set, however, you are almost certain to have universality that will adapt to just about any application; those few owners who might not would, more likely than not, be the ones who would not do the work themselves anyway. Now what are the features that make this a superlative value? Consider adaptability. Start with the one thing that could be seen as a drawback: that you will have to provide your own solid, sliding, or ratchet-type socket wrench handle--but this drawback is really an advantage!! That's right-- Using your own wrench handle, extensions, wobble extensions, ujoints, etc.,...your ability to fit the tool despite any restriction is limited only by the standard socket wrench accessories you have on hand, or can readily purchase.

How about drive size and shape? You're covered there, too: the fittings will accept both 3/8" and 1/2" socket drives; and the 1/2"-drive socket will accept the wrench handle's drive in any one of eight orientations--in case your 1/2" wrench handle is a fixed rather than ratchet-ing type.

The kit comes with one, chrome plated, 3/8"-drive deep socket which is slotted on the side to slip over the sensor wires--looks much like a spark plug wrench. If that doesn't suit (say, if your sensor is too long to prevent pinching of the sensor wires sticking out through the slot) you still have a choice between two "crow's foot" type sockets: the 3/8"-drive and/or the 1/2"-drive. On each of these, the slot (for the sensor wire harness) extends the entire length of the socket; so the socket can be slipped over the wire--and the wire cannot be pinched--no matter what. Purchased individually (if you could find them), any one of the set's sockets, even at wholesale, would likely cost as much as or more than other, single purpose tools (even at retail)...so even if you only use one socket from the kit, you're still ahead. Figure a minimum of $10 to $15 (wholesale) for each of the sockets; then add, say, $8 for the case...and you have a tool kit that could be expected to retail for at least $40, probably much more. Now consider what three separate, single purpose wrenches would cost at $35-$75 each. So whether it's brand new or used, this is a tool deal you're not likely to beat. In effect, you are getting the large-volume purchasing power (and control of price) normally only available to the big outlets--the Walmarts, Home Depots, Auto Zones and such--but you only have to purchase one item. It's also a deal in which buying your own will not cost you much more, if any, than receiving a loaner for "free"--especially when you figure in the cost of picking up and returning a loaner.

Conclusion: Highly recommended.

I bought this a few years ago after experiencing a tragedy trying to stain my 30 foot deck with a sprayer -- what a mess! The stain stick cut the time down by more than a half, works like a charm and is easy to use. When I went to use it a couple of years later, I needed a replacement head and returned to Lowes but they no longer sold the product. Cant' find it anywhere. What a shame.

This Auto Wash Stick is Great! I just got a new car and couldn't reach the top to wash it but was worried about scratching the new paint. This stick is very soft, but cleans great and is long enough to reach the top of my car.

This is the greatest invention since sliced bread! I don't know how I ever lived without this thing. I have tried other similar items like a chenille wash stick from walmart/target(junk) that are cheap and cheezy, but none compare to this item. This has performed great for years (I recently ordered replacement mitts from the homeright website) and washes the car like no other gadget. The long handle prevents the backache that comes from using a hand sponge and it fills with soapy water which you can squeeze out as you are washing so you don't have to keep dipping into your bucket. The fat handle is ergonomic for the hands;it is easy to hold/grip and feels good unlike the skinny metal poles of the cheap ones. The mitt can be removed and washed and the original one lasted me years before I ordered a replacement. Fantastic! I would recommend this to everyone, I hope they never stop making it!!!

This is an excellent product. I don't rememeber how to spell the thing this is...that starts with an S...so I will just keep calling it a product (see picture to remember what it is, as drug dealers will talk about their product, and they don't mean this...and when I say "buy this product," I am not saying you are going to get a bunch of cocaine...really, coke's not that cheap). So, it's curved, but flexable so it really hugs your windshield, and if you want, if you really really want, you can use it on flat windows too. I bought this to keep in my STi (car), and it's perfect, much better than the stupid ones at gas stations. However, they will not give you a break on gas because you brought your own...don't even ask. I hope you like and vote for my review!!!

Sam

Outstanding durability and machine washable to get rid of any greases or oils. Super protection for your hands when working with sharp or jagged items. You don't loose your grip on tools even when covered with grease.

These CDs are great! Not only did I find top quality when burning them, but they are very inexpensive.. and the color on them is a nice touch. If you are looking for a couple of CDs for a great price, be sure to get this pack.

i have had too other truck toolboxs.

so far weatherguard is the best for my
dodge 1500.i have the 114 crossbox ser.1436687
i lost the key if you would mail me a key.

at 358 pleasant st brockton ma.02301 c/o
vetchel hudgins thank you.../(weatherguard forever)

Every knipex tool is available from the premier USA knipex source! www.knipextools.com