Coolers Reviews

this is one of only few BEST compressors on market. can handle up to 5 roofing coil guns for all day. only one competition - Roll Air.

this is one of only few BEST compressors on market. can handle up to 5 roofing coil guns for all day. only one competition - Roll Air.

This Compressor is the standard on all the job sites I have been on. Mainly because they are tough and durable. Tossed around, pushed off a truck, even run over by a truck. I've seen this compressor survive some serious blows (pardon the pun). Emglo is the way to go with compressors.

Cuts aluminum like wood. Be careful though. Your miter saw instructions will generally give you precautions to follow so that a given blade doesn't catch the metal (the piece that is cut off) and shoot it like a bullet off the back side of the saw. I didn't read/follow my saw's instructions (so learned this the hard way).

Cuts nice and clean with no vibration or gouging. I do custom shower and glass barrier system installations. I like this 72 tooth blade because with care I can use it to cut both thin and thick extrusions and you don't need a large powerful miter saw which means I can save space on the truck.

The Freud LU89M series is a great blade. Period. If you've ever cut aluminum with your table or miter saw using a blade designed for wood you know how scary it is. The teeth are not designed for metal and it's very touchy. At any moment the metal can bind, overhead, kick back or throw a tooth. Wood blades are too aggressive for aluminum.

I needed to cut some thick aluminum stock (1/4" and 1-1/2") so I picked up a 10" LU89. Cuts like a dream. Very smooth, very safe. I did install a zero-clearance throat plate on the table saw and clamped the metal to the sliding miter so it wouldn't move, but what excellent cuts! Be sure to wear good eye and ear protection: chips fly. Lubricate the blade with WD-40 or other liquid metal lube (they say the blade won't clear chips if you use a wax lube) and it will just sing. It's like working with a mill.

I look forward to having this quality on my compound miter saw to cut aluminum extrusion for closet door hardware, shower doors and door thresholds.

This is an outstanding bargain. This cooler is awesome. I travel each week requiring long flights. Instead of spending a fortune on airport food and having to eat what is available on the run I pack my cooler with my snacks, meals that fit my diet. While others are eating peanuts I'm enjoying a wonderful snack all because of this cooler.

I could not imagine living without this product now that I have one! It keeps my frozen foods from the grocery store frozen for hours! I can go grocery shopping and then leave my food in the hot car while I run other errands with no rush. Soccer games and T-Ball games are so easy now that we can keep all our stuff Icy cold on hot days. Vacation's and long road trips are a breeze with this cooler. We pack drinks, popsicles, whatever! In it and because it is a soft side it is easy to fit into tight spaces. Not heavy and bulking like the other coolers. This is a MUST for any MOM! we are going to Disney World this month and I don't have to worry about not having a fridge in the hotel room! I have a POLAR BEAR!

This cooler is incredible. It keeps ice for up to two days! It is the PERFECT travel companion! I wont go anywhere without it. Thanks!

This is a good water dispenser. It was easy to assemble and it is sturdy. I think it looks nicer than the plastic/aluminum units I've rented from the bottled water companies. Well-worth the money.

I was pleased with the turn around time when ordering this product. The wooden stand was top quality and very easy to assemble and set-up. I am quite satisfied with this product and recommend this company highly.

I was pleasantly surprised when I received this item: It has a sleek wooden stand and also a nice looking porcelain dispenser. It is so much sturdier than the previous plastic water dispenser I owned! I am glad I switched!

Once again I bought a tool "reconditioned" from Amazon...and it looks absolutely 100% brand new to me...inside and out. All the plastic parts on the outside are new, the hardware, cord, handle, you name it. are all brand new. I would defy anyone to pick it out from one in a store that costs a lot more. I've had nothing but great luck with these reconditioned tools. Years ago I borrowed a Milwaukee polisher to work on a trailer's paint job...and was very impressed. Other makers try to copy it...but I think it's still the best..and a great deal on Amazon. The variable speed is a great feature on this one too.....

This is the best high speed buffer you can buy. I have used them for years in the past to buff out cars. Dropped them, run them over with cars, burnt the edges of paint on cars with them and made a lot of money with mine. I have had Makita and DeWalt in the past and had problems with both. The only problem I had with the Milwakee is the electrical cord shorting out. That was after years of abuse. The balance and weight of the machine also feels better. If you are an auto bodyman, painter or detailer, this is a must have tool. If you just want to wax your car you don't need this. You also can damage your paint if you don't know how to use it. If you do know how to use it, may be the last one you'll ever need.

Have already used it more than I thought I would. Bought it specifically for some troublesome joints and have ended up using it on much more. Love the product, my only regret is that I didn't get the master system.

This kit is very user friedly. The instruction are very good. The joints have all been very good.

This is one of the two standard ripping claw hammers in my high school woodshop, and all I can say its simply the best. Its light so you the tool will less of burden to your arm and I can feel the decreased recoil when nailing a in a nail with this hammer, compared to the an old completely wooden or steel handle barred hammer which our teacher gives us when this popular hammer is taken as it often is. And its not just the decreased recoil, the rubber grip, give you a nice smith handle on the hammer. And although you shouldn't do students have also swung this hammer against another hammer swung by another student and still nothing breaks and its as good as new while the wooden ones can't take the strain and break and the completely steel ones bend. And if you want a hammer to last this is the one, cause it has taken beatings by my fellow woodshop students from constantly hitting blocks of metal, to drowning in in water (steel rusts with water), and much more but still this tool looks and functions like normal. So overall the extra bit of cost for this hammer is definitly worth it if you want a good quality long lasting hammer.

This is one of the two standard ripping claw hammers in my high school woodshop, and all I can say its simply the best. Its light so you the tool will less of burden to your arm and I can feel the decreased recoil when nailing a in a nail with this hammer, compared to the an old completely wooden or steel handle barred hammer which our teacher gives us when this popular hammer is taken as it often is. And its not just the decreased recoil, the rubber grip, give you a nice smith handle on the hammer. And although you shouldn't do students have also swung this hammer against another hammer swung by another student and still nothing breaks and its as good as new while the wooden ones can't take the strain and break and the completely steel ones bend. And if you want a hammer to last this is the one, cause it has taken beatings by my fellow woodshop students from constantly hitting blocks of metal, to drowning in in water (steel rusts with water), and much more but still this tool looks and functions like normal. So overall the extra bit of cost for this hammer is definitly worth it if you want a good quality long lasting hammer.

I got these bits mainly to drill porcelain and other class 5 tiles.
They do a great job if you use water from a spray bottle to keep the bit cool along with low RPM. If you need to drill a larger hole, drill a smaller pilot hole first like 5/16". You won't regret buying these bits.

I own the 6pc set and they work like a charm on Blocks, lime stone and landscaping materials. Used them on Glass but you have to keep it cool to avoid cracking! I used water which it turns out was correct. Love them!

KEEPS YOUR DRINKS COLD AND YOUR FOOD WARM!
***) WE RECOMMEND THIS ONE (***
***) ABSOLUTELY THE BEST ON THE ROAD (***

This 12-volt mini cooler and warmer unit plugs into your automobile's cigarette lighter outlet.
It is lightweight and easy to carry.
It has a front panel switch to select warm or cold operation.
It can keep 6 12oz cans of your favorite beverage cold, or your on-the-go dinner warm (37-117 degrees)
Has a adjustable shoulder strap for ease of carrying.
It stays warm (or cold) after unplugging for portability.
Great Summer Item!
Size: outside: 13" long x 7" wide x 10-1/4" high; inside: 7-3/4" x 5-1/4" x 7-3/4". Power required is 60 watts (4 amps)

Model No: 5212S
Weight: 4.1 Lbs.

Nothing beats Coleman for quality. This ice chest is perfect for long camping trips, icing down your fish, or to save your refrigerator contents during power failures. Big and roomy!