Job Site Lighting Reviews

I have used the BD-1 or US-1 model Bull Dog work lights for several years in the construction trade. The large head prevents excessive heat build up, resulting in longer bulb life. In fact, I have had bulbs last several years, compared to weeks in units with smaller heads. In my opinion, the savings in replacement bulbs will pay for this item many times over.

This flashlite is well worth the money!!I"ve had it for 5 years now,lots of use same batterys.Recommend Highly!!!

This is an outstanding tool that saves me in rooms where lighting is poor, or when coming into darkened areas from bright sunlight. This lantern burns at least the 1 million candles advertised above for about a half-hour, after which is needs to be charged for 15 hours. So you can see it is best used for brief trips. An all nighter in a tent would probably be out of the question. But this thing brightens up any environment to virtual daylight. If they'd had this when searching for that Blair Witch, they wouldn't have gotten lost!

We bought this book to help us decipher bathroom quotes that ranged from $6000 to $16000 for the same job. The book allows you to browse or you can step through the chapters to plan your project. For example, I was able to compare shower modules with modern site-built approaches.

This is not the typical do-it-yourself, free-at-the-lumber-yard pamphlet information. If you are looking for style ideas don't buy this book. If you want to know what is doable at what difficulty and compare alternative approaches then you want this book.

This lamp is very expensive compared to other lights that look like they do the same thing. This is worth the money however. I have several goose neck style lamps that I've gotten for much less money over the years, but this is a much nicer piece of gear. The neck is so solid that it's almost difficult to move - but in a good way. The light housing is solid and looks like it can take a lot of vibration and bumping. I just got one from Amazon today and after putting it on my band saw - I'm back to order another two. The price is high - but this is a quality piece.

Edit:
By the way, when I first wrote this review the price was almost $20 less than it is now so, shop around.

You know how sometimes once you get something in your hands you know it is quality through out - this is one of those items. It is beefy - nearly all metal and surprisingly heavy. It bolted directly to my trusty Delta 14" bandsaw and you can direct the light directly to the front of the blade. It is extremely well made and I would consider it a 5 star tool accessory despite the high price. I wish I had checked the carton before I pitched it but I'd bet my wife's life this is made in the usa. I'm also thinking it is going to be "old new stock" and these will not be around too much longer. Kind of like their 34-172 Tenoning Attachment that Delta should have never stopped making. If it fit any other tools I have I would buy it again in a heartbeat.

Three of my Delta tools have this lamp installed. The 17-925 drill press, a 14" band saw (older version of the 28-475), and a (now discontinued) scroll saw. In each case, the lamp is just what the doctor ordered. The bracket easily attaches to many Delta tools, the goose-neck is about the right length and stays put when you move it into position, the switch works flawlessly with a nice click, and the shade completely covers the bulb. To keep the lamp shade cool, I use 30 or 50 watt mini flood bulbs, but standard bulbs up to 50 watts work OK. (Delta's similar 28-857 lamp has a longer goose-neck section, but has a "universal" bracket.)

This lamp isn't cheap, but it's well made.

We currently own 5 units which were placed on one of our projects, they like them and have asked me to purchase more. I will be placing an order in the next few days for additional units.

Wow, what an incredible light. I bought one of these Wobble Lights and I am very impressed. You can bump (smash) into it and it bounces right back, it really takes a beating. Not only that, but it also is cool to the touch. I can't count how many times I have been burned by the old tri-pod style work lights. This is a great product that can be stringed together with several other Wobble Lights, female and male receptacle on each side of the light. I want more!

The spotlight only works when plugged in but unplugged only the base light works and it does not even flash. Only worked properly for about 2 months or 4 Ten minute uses. Too much money for this light and only 3 million candlepower. Especially, when you can buy 15 million candlepower rechargeables for half the price. I must have just gotten a lemon, because I own other products made by Vector. My Cooler/Warmer in my truck runs at least 14 hours a day and has endured heavy abuse. That is the best product ever with the Vector name on it.

Try shining it on someone and watch them recoil as they are blinded and their skin becomes (uncomfortably) warm. This is a very powerful light. Using it for a night-time walk in the woods I accidentally sent a group of high-schoolers running for their lives, leaving a pile of discarded beer cans. They thought police were coming to get them.

The only problems I have had, after owning it for about a year, is that the cheap plastic "safety" trigger broke off, the metal clip on the end of the strap got bent, and I can never seem to find the recharger... oh well. Once my friend dipped it into a creek (it pierced through the water illuminating the aquatic life as well as the woods all around us) until I realized this might not be a good idea. Water did leak through the 'lens' into the bulb area, which had me worried. It was not damaged but I would not advise submerging this light. One big limit is the battery life, which seems to last around 30 minutes. Good thing it is rechargable.

Use one bulb or two, either way it is VERY bright. There is also the "area" light built into the handle, which is useful for small tasks when you don't need the full on battery draining power. The reassuring heft and warm beam of light make it a comforting companion during a cold moonless trek. Just don't stay out for longer than half an hour.

You better ask yourself just HOW much light you need and for how long. A smaller light with less of a 'WOW' factor might prove more useful, especially an LED due to the energy savings.

Before I start, I should advise that my version of this spotlight has a grey metal body with black plastic trim. There are several other variations I have seen; (red/black, "safety yellow", blue/white, camo). The functional differences appear to be these:
The position of the area light feature.
The grey model is aluminum; I think the others are all plastic.

I am writing this review after my initial inspection of the spotlight. The light is currently on its initial charge cycle; I will come back and complete the review when I have had an opportunity to examine the bulb performance and battery life.

First, let me say this this thing is _huge_. The pictures simply do not express the monster size of this lamp. The dimensions, as quoted from the owner's manual:

Height: 12 in (base to top)
Width: 7.4 in (across front of beam reflector assembly)
Length: 9 in (front to back of spotlight head)

This lamp is probably larger than most automotive emergency kits can accomodate. Still, I can think of no better lamp to have in a roadside emergency, and that makes it worth working around the bulk. I keep it in my car's trunk, in a large rubbermaid storage bin that accomodates both the lantern and several essentials for emergency repairs (fluids, a toolkit, etc.).

Some users may find the weight an annoyance. This lamp weighs in at a hefty 7.8 pounds, and may be uncomfortable to hold for extended periods. Given that most of the weight comes from the two lantern batteries, I will be disappointed if the lantern does not boast considerable battery life (I will return to report on battery life after the first charging cycle).

The spotlight is powered by two rechargeable 6V lead-acid lantern batteries. The first resides in the spotlight's base, adding weight where it's needed to maintain freestanding stability. The second battery is in the top, and while this does lend the unit a semi-topheavy balance, I don't think it would fall over except in a high wind.

The spotlight body is made of aluminum, which I found particularly impressive (as I expected plastic). Although this adds to the spotlight's already considerable weight, I think it's a great trade off for a heavy-duty lantern like this. The front and back of the spotlight are molded plastic "safety caps" (as they are called by the owner's manual). These I am not impressed with, as a "safety cap" should protect the unit. Cheap plastic offers no significant protection, and given the weight of this unit, the "safety cap" will undoubtedly break if it is ever dropped. I think these provide more marketing hype than they do actual safety. That being said, no lamp like this will survive unscathed if dropped from any significant height, so just don't drop it.

The big lens at the front of the lamp is surrounded by a protective rubber bezel. I think the bezel is hefty enough to absorb most normal shocks, and provides the best protection possible without compromising beam projection. This light would be made far superior if Vector exchanged the plastic "safety caps" for more rubber like the excellent front bezel.

The spotlight can be held by the pistol-grip style handle (I prefer the basket-style handles of some of the competing lamps, but it's a small compromise for what is overall a much better lantern). The spotlight also comes with a shoulder strap, which may make the weight a bit easier to cope with. Of course, it can also be left freestanding (though there is no way to angle the lantern up or down to illuminate a higher or lower work area).

The lantern has a 12 V receptacle in the front for running anything that can be plugged into your car's cigarette lighter (cell phones and the like). The safe current limit of this receptacle is 10 amps. A small rubber boot closes over the receptacle when not in use. This boot could have used a redesign, as it does not fit tightly inside the receptacle (it merely flops in and out with no insertion or removal force). This reduces the weather resistance of the spotlight; hardly an oversight one expects in a light advertised by Vector to be "water resistant". Annoying, but fixable with a bit of weatherproof sealing tape.

The back of the light has a three-position switch:

1. area light
2. single (one bulb lit - 1.5 million CP)
3. twin (both bulbs lit - 3 million CP)

The area light is more of a gimmick than a useful accessory. It's not bright enough to light up an area of any meaningful size. This fact means that anyone who needs both the spotlight and area light functions will end up buying a separate area light anyway, thus making its inclusion here redundant (though its inclusion does not detract from the quality of the excellent spotlight).

The spotlight is activated by sliding the rear selector switch to "single" or "twin" and squeezing the trigger. Sadly, the trigger does not lock "on" and "off"; as soon as you release it, the spotlight goes out. This is particularly disappointing, as the owner's manual advertises this as a "simple two-position lock trigger". The diagrams in the manual even show a lock switch on the side of the pistol grip that is mysteriously absent from my model. If this trigger locks, I can't figure out how (and the manual doesn't specify). The primary benefit of having a freestanding spotlight is the ability to ignite it, point it at your work area, and walk away. This frees both hands to work while the light provides illumination. I plan on resolving this by strategic application of a plastic zip tie. Not a perfect solution, but better than trying to change a tire with my right hand while balancing an 8 pound spotlight in my left.

The spotlight may be recharged by two methods:

12V / 500mA AC adaptor (included)
12V DC car cigarette lighter adaptor (included)

The instructions indicate a full charge cycle requires about 24 - 30 hours, and warns not to charge for more than 36 hours. This suggests that no overcharge protection circuitry was included in the AC adaptor's design (bummer). Fortunately, the base of the lantern has four LEDs that progressively indicate the current battery charge level. When all four LEDs are lit, disconnect the charger. The charging instructions repeatedly offer the dubious advice to recharge the batteries after every use (even on a partial discharge). What I know of Ni-Cad rechargeables tells me they should be drained completely prior to recharging, but I don't know if the same principle applies to lead-acid batteries.

Curiously, the AC and DC adaptors each use separate connections on the back of the spotlight. I assume this is attributable to 2 factors:

1. The AC adaptor is a trickle charger (a full charge takes over 20 hours). The DC (cigarette lighter) adaptor charges in 3 - 5 hours.
2. The AC adaptor can only recharge the batteries, while the DC adaptor can recharge the batteries and simultaneously power the spotlight (if your car's cigarette lighter can pump out the required 15 amps -- enough to nuke most cigarettes).

Both of the recharge connections are exposed to the elements (no rubber caps to speak of). This is another unfortunate oversight in a lamp that claims to be "water resistant". Vaguely annoying, but again, correctable with a bit of weatherproof sealing tape.

The lamp bulbs are a pair of automotive fog lamps (type H3 quartz halogen - 12V / 55W), easily found at any auto parts store. I purchased a pair of extra bulbs at Wal Mart for $8 (though you can spend up to $40/pair if you want the fancy blue ones). Unfortunately, changing the bulbs cannot be done without a Phillips screwdriver, which may be inconvenient if a bulb dies when no tools are available to disassemble the lamp housing. Consider it just one more reason to keep a toolkit in your car.


Pros:

Cool LED charge level indicator.
Solid aluminum construction.
12 total amp-hours of battery capacity.
Freestanding.
Handy 12V DC accessory charging receptacle.
Includes convenient carrying strap.

Cons:

Trigger does not lock, despite manufacturer's claim.
Not as water-resistant as advertised.
Portability is limited with a lamp this large.
No way to angle the lamp head up or down in freestanding operation.
Apparently useless area lamp feature.
No toolless bulb replacement.
AC adaptor has no overcharge protection circuit.
12V charging receptacle boot cover is a poor fit.

Despite the numerous minor complaints I have about the design of the Sport Spot, I am still very satisfied with my purchase. All of the flaws I've observed are either minor or easily corrected (or both). I have examined the competitors carefully, and I am confident this is the best lantern to stow in your car's emergency kit.

I will review the following aspects of the lamp's performance, and I will return to complete this review once I have gathered more info on:

1. Brightness
2. Battery life
3. Cost of replacement batteries
4. Support (yes, Vector offers a toll-free support line; and I intend to try it out)

-sean henning

If the magnetic base on this light were twice as strong, it would be worth owning and deserve a high rating. As it turns out, the magnetic base is far too weak for many of the applications that this light is intended for. Here are some things I tried with this light:

1. Standing upright on a cast iron table (such as a tablesaw) - This thing nearly jumped out of my hand to stick to my tablesaw.

2. Attaching to the side of my drill press - Basically the magnet would not hold the light in this position. Only if I flexed the neck so the lamp itself hung straight down would it even hold itself to the side of the drillpress - and then it was so wobbly that I was afraid to turn on the press for fear that the light would slide right off...

3. Hanging straight down from a metal plate on the ceiling - This light will support itself in this manner so long as nothing bumps it, in which case the magnet gives up and the whole thing falls down.

So, I have to say that either I got a bad magnet or this tool is not worth owning, or both. Since a clamp on light will do everything that this can do and more - I don't recommend that you buy one of these!

I would prefer this lamp to allow the use of a standard size bulb, up to 100 watts.

THE LAMP IS PERFECT FOR A DRILL PRESS OR BAND SAW AND CAN EASILY BE MOVED BETWEEN MACHINES.

after using infrequently for 6 months the switch broke , rendering the light useless. Have not been able to track the company down for a replacement.

This is a greal spotlight. I can not attest to it being seen 2 miles away, but it does light up a room in a cave from no light to no need for your flashights powerful. As the other reviewer I also give this 4 stars only due to its very extended charge time, more than half a day. After all that time being recharged, you get only 30 minutes of use. But I still like this spotlight very much, it is, was, one of 3 I had in my duffle bag. It does have a stronger ,brighter brother that I like better only for it being waterproof.

If you need a really bright hand light, this is it! Too bright to use as a regular flashlight, but just the ticket when you need "reach." We found our cat in a tree 200 yds away with it.

Support is very good - after 3 years of occasional use and poor charging habits, the battery failed. A call to the manufacturer (number and address on the instructions) had a replacement on it's way, and it's now as good as new.

This is a very nice work lamp. However, I haven't been able to find a replacement bulb.