Power Supplies Reviews

This is a great product that will save the owner much time. It is a must have for anyone that does home/auto repair. I was trying to remove a rusted nut when I bought this product. I had it off in seconds. I can't say enough on how useful this tool is. I gave it only 3 stars because the Dremel 3956 or 3962 are a better value. Both the 3956 and 3962 have a variable speed Dremel instead of just a 2 speed Dremel and the 3956 includes the flexable shaft. The price to go from the 2850D to the 3956 is about $10 and the 3962 less than the 2850D. Still you can't go wrong on any of the Dremels.

This purchase was my first Dremel tool. I've used it to sand, grind, cut and fabricate small pieces or to modify larger pieces. You can do almost anything with one of these things. And with all of the new attachments they are coming out with....it just gets better....buy one...seriously... you wont regret it.

This is a tool that you can't appreciate until you buy it and allow it to "save the day" time after time. Since I purchased this kit I have taken on jobs where I would never have imagined this tool finding an application, and without fail, before the project is finished, I find that I not only put it to use but I would have been stuck at a dead end were it not for this kit. Buy it and let it prove itself you wont be sorry.

I have owned many, many Milwaukee tools...But this one was a real disappointment. I estimate 7 to 8 hours on the tool before it is absolutely unusable. First the "random" action ceased, which is not uncommon with a worn out "belt"...but the power became less and less, sparks emit from the windings. I was shocked to get this poor of quality from Milwaukee. Not to complain, but the housing is also very light, the entire unit just feels "cheap" to me. Granted, it is a cheap (inexpensive) sander, but I expected a little more than 7 or 8 hours of use from it.
I still recommend Porter Cable, I generally get good hours out of that brand...DeWalt does ok, Makita, so-so...Hope that helps anyone out there lookng for a unit that will hold up under use.

Best sander I bought. It most likely will last me for a while. There is one draw back, do not buy the psa. Every time I put a new sanding disk on, it just shoots off. But the Hook and Loop. Hope this helped-

Milwaukee is noted as being a producer of top-notch tools for the professional. This sander lives up to the Milwaukee name.
The tool is comfortable to use, doesn't make too much noise and I know it'll outlast most other brands by a large margin. It even comes with a little vacuum bag to help keep down dust particles. This type of sander is usually one of the last tools you think of buying, but once you have it, you'll wonder how you got along without it.
One caveat BEFORE you purchase the 6018 (used with stick-on sanding disks) or the 6019 (used with the velco-type hook and loop sanding disks)!!! Check which type of disks are available in your local area!!! I bought the 6018 (stick-on), only to find that just the hook and loop type disks were available at the local Home Depot. Furious, I called Milwaukee to get a price on a replacement hook and loop type base ($30+!!!)...(similar base for the Porter Cable is $17.00) I must have sounded a little irate and they sent me one free!!! Now I have a choice of which disks to use. Don't count yourself this lucky....check which pads you can buy at local outlets and save yourself some grief.

I bought the 6148-6 to flush grind welds on a table saw stand that I made from 3/4 inch square mild steel tubing. The job was completed very quickly, much to my delight. The tool is powerful and the motor temperature barely moved above ambient throughout.

Some reviewers have commented about the less than robust wrench that is included. The tool that I bought included a wrench that is 1/8 inch thick and is entirely up to the task of tightening and removing the abrasive disks.

I have owned Ryobi, DeWalt, and Milwaukee grinders, and Milwaukee is by far the best. Powerful rugged and can stand up to heavy use. The wrench is not strong enough to remove the wheel if it is very tight.

I built a fireplace in my basement and needed a grinder/cutter to shape the stones as I put them on the fireplace. This tool worked great. With a diamond blade it cut the stones like butter and the grinder wheel fine tuned the stones so they fit perfectly. The three position handle was especially convenient in the shaping and cutting the stones when I found myself in an awkward position. The motor had plenty of power and didn't bog down. Removing and installing the blade guard was a little awkward until I got the hang of it. One of the previous reviewers complained about the wrench and how difficult it was to use. I found it easy to use and had no trouble changing blades and wheels. I highly recommend this tool.

The switch on this drill is difficult to operate. Myself and two other guys had problems with it. The drill is either locked on or off. If the bit jambs you can not quickly stop the drill or for any matter it is difficult to stop. This is a problem and will probably burn up the motor when it is jambed and attempts to turn. I guess if Hitachi makes a better switch or even a simple trigger it would be a great drill. I am returning mine tomorrow.

I bought the Hitachi mainly based upon price because I don't intend to use this drill on a daily basis. There are some times that only a right-angle drill will do. It is well built and a solid performer but the slide swith is a real bummer! Mostly you will NOT want the drill to run continuously. I whittled away the small catch on the slide (good-bye warranty) and find a much better drilling experience. I now control when the drill runs. But for the switch I would have given it 5 stars.

First of all, I want to clarify something in another review of this product. The type of switch on this product is for tight space! It is impossible to maintain a firm grip (control) on a power tool and operate a paddle switch at the same time. I have used tools in both construction and automotive all of my working life. For example: the old Snap on air ratchets had a index finger (trigger finger) switch. The other inexpensive tools have a paddle switch that all of us in the business call, knuckle busters! I own both types. With a paddle switch type, if the tool is under load or starts to get away from you, of course you can't just let go of the tool to shut it off! If you hang on, as we all do, your hand and tool can become sandwiched between other material such as 2X4's with nails or screws or sharp metal. I had it happen with a high torque air ratchet, where the tool was under load and pulled my hand into metal radiator, shroud and fan blade, tearing the flesh from my knuckles and the back of my hand. While screaming in pain, I had to contort my body and use my left hand to disconnect the air line from the tool to shut it off, after the damage was already done! This is probably not going to happen in construction but you get my point Why do most high speed grinders and cutters not have these paddle switch's???? Hitachi engineers were really on the ball with this tool design! Once again "one up on the competition"! The best in it's class! I bought this tool for the following reasons: the type of on off switch, speed control dial, reverse and forward, and of course Hitachi's excellent quality and ergonomics. I am delighted with all of my Hitachi tool's, great tool's!

i haved used at least 5 of these routers and they work great right out of the box but the base becomes warped very quickly making it difficult to router properly especialy with flush cuting bits i have 6 years of full time wood working experiance and the last time i used one i messed up flush cuting because the base was not flat i would by the Bosch 1618B if u plan on using the router more than a few times because of the superior base

This router is great for a first or only router because of its versatility. You can buy a plunge base if you need it, but i dont really care for it too much but it is cheaper than a new diecent router.The dhandle is a great feature it gives you alot more contol than just the two knobs found on most routers.1 1/2 hp is pleanty of power for most applications.The collet i dont mind but use real wrenches,the ones in the kit are cheap and tend to cut your fingers especially if the bit is in there really tight.The 690 series is the most popular router, many other accesories are avalible, which make it even more versitle.If this is your 1st router of your 50th, you have to have one.

This is a wonderful router. We have made blind, taporing, dovetail socket routs, and parts to match. With this router we wiz right through the ladder rails and rungs with no complaints from this router. I just wish that the bits would keep up with the router. The "D" handle is just the perfect size, and the locking trigger is perfect for all of the routing that we do. The only complaint that i would have with this, and this is with every router I have ever come to research, and use, is that you can not hook up a vacume source anywhere on the router. Luckily i work in a wood shop with my father, and he is definatly from the "old school" and we designed a great design for that. Thanks Porter Cable, Daniel Kroeker Juniata, Nebraska GO HUSKERS!!

Works well with my computer except for the fact it could use more of the transformer outlets on it. Otherwise, its a good product.

Works well with my computer except for the fact it could use more of the transformer outlets on it. Otherwise, its a good product.

I just purchased this jump starter and I am a little disappointed in the quality. First off, the clamps on the jumper cables are made of plastic; I will probably be using this jump starter in cold weather and plastic gets brittle in cold weather. Furthermore, I would like to have seen thicker jumper cables. Secondly, the power inverter can only run very low wattage electronics, i.e. a laptop computer. I tried powering my 20" CRT television, but no go. I doubt it can run any standard tools such as a corded drill, or any garden tools. Thirdly, the storage area for the compressor hose is a very tight squeeze and I am worried the hose will eventually break from being forced in there all the time. Furthermore, there is no place to store the charging adaptors in the unit. If this thing is dead when you want to use it and the adaptors are not with it, it is useless. Lastly, there are no directions that come with the unit, in fact, no literature what so ever. I would have at least liked to have known how long I should have initially charged the battery.

On the other hand, I like the battery status gauge and the air compressor gauge. They both come in handy and this unit is one of the few that offers them both. The work light uses LED's instead of light bulbs, so it should last longer. I like that the case is rubberized and it looks like it can take a bit of abuse.

There are better quality jump starters out there, but for the price this one is a pretty good buy. In addition, if you go on the sportsman's guide website, it sounds like this unit has a lifetime guarantee.

I am very satisfied with the performance of the Guide Gear 5-in-1 Jumpstarter / Power Station. It delivers performance and capability as advertised. I purchased this item for two main reasons.

1. A backup air compressor and emergency jump starter for cold Montana winters.
2. A DC power source for various astronomy related electronic components.

It works superbly on both counts. It is a very good quality, heavy-duty piece of equipment.

The only negative comment I can make is about the plastic protective shield covering the instrument panel for gauges and ports. It tends to get in the way with regular nightly use. However it does a good job protecting the instrument panel during inclement weather.

I've been a finsish carpenter for 7 years and I've used all the saws out there and this saw is by far the smoothest, and the most accurate saw on the market. I did not give this a 5 star because of the locking mechanisim, has broke on me 3 times in two years. Also you can only go 60 degrees one way instead of both, like the older version. Change those two things and you've created the ultimate saw.

and i've used them all I think! However, it doesn't get 5 stars because the fence along the back, crucial for getting a square cut, wasn't straight. Hopefully this manufacturing glitch didn't show up on all the units. The nice smooth action and the quiet start make this saw stand out however.

A nice tool which includes most everything you would want with a small router package like this. I use the offset base most, and the collet is easy to use and bits adjust easily for height. The only problem I have is that the bit chatters when used with the offset base. It has some play in it that is not a problem when using a flush trimmer bit with a bearing, but when other bits are inserted they don't cut smoothly. The other bases work very well though.

I've been using this things for about a month now. It's a wonderful little router. I can easily handle it with one hand. I am comfortable using this thing in any orientation--horizontal, vertical or upside down.

I grab this router for edge treatments, like round overs or chamfers. It has more than enough power for these jobs. I used it to round over about 50' of hickory. It did a splendid job on this very tough wood.

The bits are easy enough to change. There is a collet lock button. You press the button to prevent the collet from spinning and then you can loosen the collet with one wrench.

This is one of the fastest brooms i've ever ridden. I used to have a Nimbus 2000, and this certainly a good replacement for it. The price is a little high in muggle money, especially if you are going to only use it for cleaning.