Miter Saws Reviews

first of all wear gloves when handling this blade (very very sharp) i checked out the runout with a good dial indicator could not dectect anything worth mentioning. runs true extreamly fine cut and very cool even after hours of use. i could not even guees how much hard wood i have cut with this blade must be hundredes of board feet. this blade keeps its edge and set still so sharp i slice my fingers when changing blades if i dont use gloves or shop rags. the teflon coating keeps resin and pitch to a min. just wipe it down once in a while with rem oil(gun oil).this is one if not the best 80 a.t.b. blades i have hade the pleasure to use. the kerf is not as thick as systimatic trim blades only .104 the trim blades are .131 and still i find no deflectio. this has quickly become my favorite finish blade. systimatic has become a manestay in my shop. try one i think you will be very pleslently suprised how fine a blade systimatic makes. i dont think you cane beat them at any price.

The bullnose guide is very good tool for cuting tiles

This replaces my miter gauge that came with my saw which was very sloppy in the track. You can adjust this one to fit snug.

It's heavy and well machined like its more expensive brother.

I have it setup with an aluminum fence solely to make simple cross cuts that for whatever reason, I'm not or can't do on my miter saw.

So if you don't need a miter gauge to cut multiple angles this represents the best value for it's category. Or as a dedicated gauge to supplement a miter sled, or more expensive gauge that's been preset for specific angles and you don't want to go back and forth reseting.

I use it every day for trim work! Great features like the hold down clamp. I took the time to set it up and it cuts prefect 45's I also like the Board stop and the side arms. Nice saw for the price. Also bought the 3PC Trim blade set from these guys!

I got a couple of these after watching "American Nija II" and damn near took my friend Blocks hand clean off. Blood everywhere, I'm tellin ya, his dog started licking it and I know folk say a dogs mouth is clean, but I was heaving all over the place, so if ya want to do some damage, the carbides are the way to go.

Love this stand from the time I saw it but was unable to find the wheels. I found the perfect wheels on a craftsman generator which I replaced with a wheel kit and used the numatic ones on my dewalt stand. It is sturdy slightly heavy but with wheels just what I need when working alone. Did I mention it was very sturdy, sets up fast, anyone ought to be able to figure out the wheel thing. I really like it.

I just received my DW723 Miter Saw Stand from UPS. Setup is opening the box and unfolding the legs and clicking in place. I LOVE IT. I bought the Bosch 4212L and thought I would buy the Bosch stand until I read that it can take hours to assemble. That was it for me. Buy the DeWalt, you'll love it.

This is a great product, and you can get it, along with any other products on Amazon up to $500 Free! Participate in a special promotion and get a free $500 Amazon Gift Card at this web site: nocost2u.biz/amazon

I love all the features of this saw except the fence...when it goes out of square, forget it! The fence is the weak part of this saw...you have to first remove a screw and bolt holding the swinging fence extension to access the two bolts holding the fence to the left. There are also two bolts holding the fence to the right. If this saw goes out of square from the factory you might as well forget about it...I'm not impressed. I'm selling mine and buying a Hitachi or Bosch.

Just got this saw and have only made a few cuts, but I love it already. The cuts are incredibly clean, even when using the blade that came with the saw. The action is very smooth. The big table is definitely a plus, The miter adjusts easily and smoothly. The bevel adjustment could be a little better, but it is not bad. A couple people said the saw does not do both right and left bevels, but that is not true. It was a little off right out of the box, but it was easy to get aligned. All in all, I think I made the right decision.

This is the best saw I have ever owned! I don't have alot of fancy talk, But I have this saw!
I am a finish carpenter from the jersey Shore. The builders and homeowners are very demanding about quality. There is no hurrying up here. The real carpenters take the time to make the extra cut to make the mitre perfect.
With this saw, the extra cut doesn't take that long. The first cut is so perfect. If it takes a second cut, it is usually because you put the header slightly off level.

Thi saw is quiet, smooth, accurate and in addition to that realy good looking.

I am glad to have spent a most of a weeks pay to own this saw

THe Bosch 3915 is a great addition to my power tool collection. I was impressed with it's ability to cut 2x8's and 10's as well as fine trim. The rails have little play and can give you very accurate angle cuts in both miter and bevel positions cut after cut.The only thing that could be improved is the dust bag chute. IT clogs very easily when cutting undried (framing) lumber.

I have used this saw to put up intricate crown molding and to build a large outdoor playset. Cuts are very accurate and precise!!! And since it is a slide it can cut much larger pieces of wood than a non-sliding miter saw. Highly recommend!!!!

THIS SAW IS THE BEST IM A CARPENTER AND I LOVE IT BEST THING SINCE SLICE BREAD. DEWALT MAKITA AND HITACHI CAN JUMP ON DEEZ, THEY HAVE NOTHING ON BOSCH

I am a handy man by trade. So I am not really into a lot of finish work but this is a great dual purpose saw. Its not too heavy being over the age of 65 weight is a definite consideration. Easy to use and the laser is great. I am getting used to pushing the saw blade in versus pulling it out toward me as on my old Dewalt. I like the slide feature as well. I found the reviews to be a big help. Enjoy the saw. Price was excellent as a fifty dollar discount was available at the time. Worth every penny.

The saw is excellent but don't fall for the rebate tool offer from hitachi, whatever it is (I was to receive finish nailer)or drill they just won't send it without repeated correspondence.

I purchased this saw through Amazon after about a week of comparison shopping and reading the reviews on this site. I just want to thank everyone that took the time to express their thoughts on this product. I am a general contractor, I do residential remodeling and finish work on new construction. I have used this saw on the job for three days, so far and I am very impressed. I would recommend this saw to anyone that is in the market to buy a saw with these features.

Great service by Amazon. They sent a replacement for the first saw, 2nd day delivery, no charge, return shipping paid, no problems.

Both saws had the exact same problem: the fixed detent place was off for both 45s and the 90. No way to adjust this problem, so I took the plate completely off on the replacement saw, and am using an Incra Guaranteed Square and an Incra Guaranteed 45 to set the saw. Tollerances on the Incra are guaranteed at an amazing .0001 along the entire blade. Didn't even try the blade that came with the machine. Instead am using a Freud 96T Ultimate Cutoff blade. Kind of a pain to set the saw each time, but I use it to cut picture frames, and they must be perfect. Too bad the company can't make the plate to exacting standards. I really would have liked to have used the maching and not set it each time. But it's okay. With the plate missing, it sets with twist of the wrist of the handle without messing with holding down the detent stop.

Otherwise great saw. Starts up without a bang like my old Ridged. Lasers are parallel and adjust nicely for the new blade. Real satisified now. Again, thank you Amazon for the service.

Great cutting saw, the twin lasers make lining up and cutting a snap! I put a diablo 80-tooth finish blade on my Delta Mitre saw to cut some moulding, and was amazed at the cut, incredibly smooth and very easy to line up quickly with the laser system. Changing both the mitre and the bevel was a snap. Great saw. I have not tried the stock blade, since I was doing finish work I wanted a higher tooth-count blade, so I cannot comment on the stock blade.

I can't say anything bad about this saw. The lasers are a dream. I want lasers on everything now. The only thing I have to deal with is its right side laser gets obscured by dust after a couple hundred cuts. This, of course, is easily rectified by simply sticking your finger up there while the saw is plugged in - ha! Caught you sleeping! Practice safety on the job! Unplug your saw to clean the laser lens with a soft artist's brush, and this saw will keep you smiling. Safety first!