Router Bit Sets Reviews

Milwaukee always represents quality and this set is no exception. Well worth the expenditure.

If you want good, really really good, drill bits - GET THESE! The differance between these and cheap ones is unbelievable. Worth every penny. Accurately sized, finely machined, SHARP, properly ground angle, and somewhat larger sized index case with size markings that are easy to read. I first used these to drill some holes in metal for tapping. Granted I was using a drill press but I hardly felt any resistance at all in the handle. A perfect clean hole.

Good drill bits are getting harder and harder to find! These are the fastest and smoothest bits I've found for drilling metal hands down.

This "IS NOT" a 1/2" shank router bit set. Please correct the product description. It is a 1/4" shank set.

This set is very good for its purpose: cutting various grooves, dados, etc for plywood. If you use alot of plywood, this set works great.

If your doing some plywood joinery, these bits won't let you down. Incredibly smooth cuts with no tearout. These frued bits just "sing" through the material. Definitely worth the money.

We all know that a 2x4 isn't really 2" x 4", and plywood is the same way. These bits are undersized to compensate for the sanding process of plywood. These bits will provide a great fit without any slop.
Don't use this set for making Dado's for MDF because 3/4" MDF is really 3/4", 1/2" is really 1/2" and so on.
I hope this helps

The 5 piece set is what I initially bought. It includes the glue up joint bit, which is nice for gettting a lot of panels to line up properly while gluing. It also includes the door lock bit, which will turn your raised panel, into a drawer front by removing the material around the edge of the back of the door face.
I bought this set as well. Why? Because when making kitchen cabinets, the raised panel bit that they provide with the 5 piece set is too small for a large cabinet. (Unless you prefer that look) So I bought this set, to pick up the 3 1/2" panel raising bit. That requires a large opening of at least 3 5/8" on the bottom of your router, and the opening on your router table as well. The Bosch 1619EVS is even larger than that. The Fein RT-1800 allows for the the use of a 3 1/2" bit, but the casting prevents you from plunging a bit that size. Not really recommended, because you might accidently adjust it into the base. Their are others also, but most fixed base 2 HP routers won't accept such a large bit. So measure first.
Overall this is a great set of bits. They do a great job, and last a long time. Highly recommended.

For those reading the review of the 99-218 panel raiser, try using a 1/8" backcut on your panel and your alignment problems dissapear.

I found the Freud 97-102 an excellent product. However,I found to get the maximum profile(1-1/4")and keep the panel & rails flush in the front,I had to use 3/4" stock for the panel, and at least 13/16" stock for the rails/stiles.(The panel cutter has a 5/8" depth of cut) A better choise is the Freud 97-100 set. It has the same rail/stile bits, but the panel bit included can take as little as 3/8" depth of cut and still get the full profile! This means you can use thinner stock if needed,and end up with a much better proportioned door.

I received the Makita 3612CX1 from Amazon a couple of weeks ago. Since then, I have cut a few half-blind dove tails with it on a PorterCable Omnijig. It feels well, cuts well and is loaded with nice features such as the soft start and electronic brake. These 2 features enhance the router's utility in combination with templates and machines such as the Omnijig.

The router is also fairly quiet and is lacking that high pitch scream that other routers have. This makes it a lot easier on the ears. This router is going to serve 100% above the table, while my other 2 routers are being dedicated to the router lifts.

I strongly recommend this router, especially if you are only going to have one general purpose router.

Pros:

1) Same as 3612C, but packaged differently for $40 less.
2) Low pitch noise and quieter than my 10-year old single speed Makita 3612 router.
3) Soft start which keeps it from jumping off of jigs.
4) Eletric brake shuts down faster so it can be removed from jigs quicker without taking a bite out of them. Makes multiple cuts faster.

Cons:

1) The coupon for the router bit set is an inconvenience. Amazon should ship the bitset with the router or supply it themselves. Have to find another vendor to order the bit set from.

You can like different routers for different reasons. I had two of the fixed speed version of this router. One got stolen, I replaced it with the variable speed version and I love it for these reasons:
1. It is very quiet even at highest speed for a 3-1/4HP router. In fact it is much quieter than the fixed speed version of the same router at the same speed.
2. It is relatively small and light for its power. It is not a light router, you will have to use with two hands always. But I can do delicate edge treatments with small bits with no issues. It is powerful enough to mount under the table when you need to. That's why I think this is a very versatile router.
3. Plunge action is very smooth and capacity is good. 3 step debt gauge works fine although I use it rarely since the router is powerful enough to do most cuts in one pass.
4. Fit and finish is great. You can tell it is a well-made tool when you hold it. Power cord is long and soft - does not stay coiled when you are using it.
5. You can lock it down using the height adjustment mechanism - not the plunge lever- and it acts like a fixed based router. Therefore you do not have to change bases from fixed to plunge. You always have both at your fingertips. That's why prefer this over the multiple base combo kits.. another reason why I call this a very versatile router.
6. Also the 3-piece door bit set came with the router, not a coupon. The bits are very high quality. Thick carbide tips, nice bearings. Nice wooden box.


Here are some negatives you should consider- but these are not enough for me to give it a lower rating:
1. The plunge lock lever is metal and you have to push it down with the side of your index OR middle finger. With lengthy use, this may hurt your finger. I screwed a small bent extension to mine so that I push it down with tips of my two fingers and it works wonderfully.
2. It does not have a case.

If I lose one of my routers, I would buy a another one of these without a question.

The router is great and works great just like ones i've had before. There was a great sale on it when i got it. I was a bit dissapointed to found out that the router bits that are supposed to come with it, and there was just a coupon for them. You must have to try and get them from a local dealer or somewere else ? rather inconvienent .....

I bought this 3 piece set as my first set. It has worked great. It is easy to set. It cuts cleanly. I am very pleased. Make sure you have a router with a 1/2" collet and a router table.
If I had it to do over I would have spent the extra money for a set with the back cutter.
Excellent product.

The popular 5 piece set is what I initially bought. It includes the glue up joint bit, which is nice for gettting a lot of panels to line up properly while gluing. It also includes the door lock bit, which will turn your raised panel, into a drawer front by removing the material around the edge of the back of the door face.
I bought this set as well. Why? Because when making kitchen cabinets, the raised panel bit that they provide with the set is too small for a large cabinet. (Unless you prefer that look) So I bought this set, to pick up the 3 1/2" panel raising bit. That requires a large opening of at least 3 5/8" on the bottom of your router, and the opening on your router table as well. The Bosch 1619EVS is even larger than that. The Fein RT-1800 allows for the the use of a 3 1/2" bit, but the casting prevents you from plunging a bit that size. Not really recommended, because you might accidently adjust it into the base. Their are others also, but most fixed base 2 HP routers won't accept such a large bit. So measure first.
Overall this is a great set of bits. They do a great job, and last a long time. Highly recommended.

I just purchased the 3 piece cab. bit set from freud and I am very excited. The set came within a few days of ordering- thanks Amazon. The bits are extremely sharp and the finish is excellent. The box that comes with the set is well constructed to keep the bits safe and free from dust, which is nice. The only concern that I initially had was whether or not the 3 1/2" bit would fit in my router base opening. I have a 7539 p.c. router and the opening is 3 1/2". I had to file the opening just a little to make the bit fit. I am sure that you will find this most acceptable. The cuts with the bits are very clean, just like the ads say, and there are no pieces of fuzz on the top of the profile on the end grain. This will save some valuable time. All in all, very good product and the price was extremely good. In fact, the cheapest I could find.

The router bit set was just what I needed to use with my Dremel.

I use these router bits and the two styles of routers for building minuature wild west buildings and doll house furniture
With these bits I can make very percise cuts and with the finished product I've sold them for as much as 250-300 dollars each. My only regret is that dremel would make some other types of router bits just like the big boys.

Un producto de excelente calidad que no se ve en Costa Rica y a un buen precio

Bueno creo que el titulo lo dice todo, son cuchillas de excelente calidad y a un muy buen precio.

De hecho ya estoy comprando otras mas de la misma marca

Whether you are making one or twenty cabinet doors, these bits from Freud will give you the results you are looking for. Red and white oak is no match for the sharpness of these bits. My one and a half horsepower shaper is enough power to turn the raised panel bit through oak with minimal drag. More power is better but less will do. The design of the bits prevents you from taking too much bite causing kickback and dangerous flying objects. The included instruction booklet provides step-by-step detailed instructions on constructing raised panel doors. I found this very helpful. The finished edges require no sanding and the fit, if time is taken for proper set up, is unmatched by competitors sets. I am currently replacing my entire bit collection with Freud products. Two words "they work".

This cabinet door set does an outstanding job of producing a smooth finish surface. Setups are easily accomplished and the finished styles and rails match perfectly. The panel bit produces a profile that requires no finish sanding.

I have had two of these for quite a while. It would be hard to find an easier to use lightweight freehand router. It is hard to believe, but it has plenty of power for almost any task. Many routers have low tech collets--massive things with few compression slots. They require a lot of force to close securely on a bit. They also tend to freeze on to a bit making removal a chore. Makita uses a high tech finely-machined collet with many compression slots. The result is a collet that holds securely and releases easily with only very modest tightening required. Height adjustment is primitive by current standards.

We are a cabinet shop, and bought several of these routers many years ago. Now needing more routers, this is our first choice, and are glad they are still offered. Aside from replacing the occasional cord, they have been been totally reliable and a great all around tool to work with- not too heavy, not too light. They are used almost everyday and haven't needed any servicing in 15 years. We can't believe they keep on going.

Not a shill for Makita, and have a lot of tools from other good brands that are great- PC's biscuit joiner, Bosch's jig saw, etc. That being said, when we replace a tool the "M" brand is hard to beat. Hope this helps. -Rob

This is one of the best set of bits I've owned. I was skeptical about ordering tools online, ordered this set anyway as a gamble and was pleasantly surprised by how happy I am with them. Upon calling Woodline to express my happiness I learned more about their lifetime warranty, and it actually is a lifetime warranty, no fine print (but I doubt I'll ever have to use it) and was pleased with their friendly customer service.

Like many of you I have purchased many router bits over the years and I have been dissapointed more times than not. However, after the speedy delivery of my 30pc set from Woodline (I recieved the set only 2 days after I ordered IT!) I was amazed with the quality of the router bits. The carbide is superior to anything I have used before and the bits cut so smooth without any burning or chatter. I have used everything from expensive Italian imports, US made, Taiwan, and Chinise, and I will never use anything other that Woodline router bits again! Bob Mcowski - Devoted Woodline User