Sanders Reviews

I bought this to use with my Porter Cable circular saw and biscuit joiner. PC has a non-standard size (1") O.D. connector on its handheld power tools that won't work with standard vacuum hoses. This kit comes with an adapter to size up to 2-1/2" but since I don't hook it up directly to the vac, I plan on buying a 2-1/2" coupling from Lowes to connect it to my 2-1/2" hose. Together, they're really easy to hook up and suck about 50-70% of the dust. It's length and flexibility really help as well.

I have been impressed with this dust collection system. It was easy to install and works well on my 6" dia. orbital sander. Though some dust still escapes, it is a dramatic improvement over letting the dust fill your work area. On the other end I use a 6.25 peak Shop-Vac QSP Pro and a Sears automatic power switch, which automatically turns the shop vac on when you start the sander. One note of caution, this dust collection system does make the sander harder to hold onto, especially when you are using just one hand.

This looks like the best deal in replacement accessories for the sander polisher. I find that I have to buy replacement sandpaper (especially the fine grit) more often (separate package). I tried putting together my own sandpaper, but after the cost of the velcro and the imperfect fit, I went back to the B&D accessories.

The only problem I have found is the screwdriver attachment is a bit cumbersome for tight spots - it worked well putting up curtain rods, but had difficulty putting in child safety locks in drawers and cupboards due to tight spaces.
Sanding and scaping functions well, overall a very nice value.

I recently purchased a house and wanted to do some simple remodeling and redecorating. Being a 65 year old female, I needed tools and techniques that wouldn't tax my strength, energy and ability. The Black and Decker Project Mate worked great especially in refinishing my kitchen cabinets. I especially appreciated the ability to get into corners with the sander and having the ability to put a new corner sanding strip on without changing the entire sanding strip

I owned a 10 year old Black and Decker 1/4 sheet palm sander that was very loud, very dusty, and very prone to vibration. I mainly only use my belt sander and random orbital sander anyway, but there are those times when a 1/4 sheet sander is still the best tool for the job. So, I bought this unit as a replacement. First I will start with the good stuff:

1. This sander is a bit quieter than my old one, but not much.

2. The gel-grip design on this sander is fantastic - no more tingly hands after sanding for a long time.

3. The dust collection works decently, and is of course a vast improvement for me since my old sander had no dust collection.

4. It is very affordable!

I guess what I am saying is that for what it is, this is not a bad sander at all.

Now for the few drawbacks...

1. This sander came with a separate plastic jig to use for punching the dust collecting holes into your sandpaper. I really wish there were another way to accomplish this since the jig never seems to be handy and/or where the sander is.

2. Although it IS quieter than my last palm sander, this thing is still uncomfortably loud.

3. The on/off switch is located in a perfect spot, but I wish it were not so recessed. Sometimes I have to fiddle around trying to get the thing on or off.

Overall, I am pleased with the quality of this tool. There are of course nicer sanders on the market but for the price this one cannot be beat!

This is a very handy little airtool. I use it for deburing the inside and outside of pipe, plate and almost anything, the belts are 3/8x13 and are a little hard to find but u can get them at www.mcmaster.com they have them for a good price and they are good quality. i recomend this tool to anyone who likes to make high quality parts. This also is nice for cleaning up the edge because u can push the tool down and the belt will flex around the edge and will clean and round out the edge of a plate or a nice angle for precise and easier welding without having to worry about dirt and burr on the edge. it works great on stainless too. it lets u dress the weld and helps soooooo much in prepping stainless or aluminum for polishing. i gurantee this will save u lots of time and it is 1 nice little handy tool.

This is a very handy little airtool. I use it for deburing the inside and outside of pipe, plate and almost anything, the belts are 3/8x13 and are a little hard to find but u can get them at www.mcmaster.com they have them for a good price and they are good quality. i recomend this tool to anyone who likes to make high quality parts. This also is nice for cleaning up the edge because u can push the tool down and the belt will flex around the edge and will clean and round out the edge of a plate or a nice angle for precise and easier welding without having to worry about dirt and burr on the edge. it works great on stainless too. it lets u dress the weld and helps soooooo much in prepping stainless or aluminum for polishing. i gurantee this will save u lots of time and it is 1 nice little handy tool.

I have used this for woodworking for a couple years. I use it for fine sanding of cabinet doors, and really does a nice job. The sander itself is very well built and works great, the pad is a little stiffer than I would like or I would give this a 5 star. Nice tool.

Excellent flexibility for the hobbiest woodworker. Complete flexibility to the project at hand. Curves, flat edges, beveling etc all done with ease. With 3rd party disk you can even sharpen tools. I love mine so much I bought this one for my Father-in-Law.

The table does the trick for better control on longer parts, setup is critical

The drilling instructions are not correct for the holes 1-3/4" from the Bevel edge. Lay out your parts first and you will see.

The assembly instruction leave much to be desired.

This frame is easy to use and makes into a stationary belt sander fast. It also works vertical and horzional making two machines out of one.