Delta Reviews

LOve the worklight. Wish it had 1 micron filters and it is way to noisy escpially sice it only moves 400 cfm of air w/ filters insatalled. But it is effective in my small work area.

The Delta ambient air cleaner provides adequate air cleaning if used near your work while sanding etc.

I set mine up over my sanding /glue up bench.

I use this air cleaner when remodeling homes because of its portability. I set the unit on the floor so that it is blowing outside through a door, or sometimes on sawhorses and out a window. Great for clearing the air, including paint fumes. This unit DOES NOT have to be mounted 7ft off of the floor as the other reviewer noted. It is designed to be used on the floor, on a workbench, or hanging from the ceiling. When hanging from the ceiling it MUST be at least 7ft off the floor so that someone doesn't hit their head on it. But, if you are planning to mount an air cleaner to the ceiling, get a larger air cleaner, such as the AP200, which sells for ten dollars more than the AP100, but will filter down to 1 micron vs. 5 micron and also has a higher CFM rating. Another great Delta product.

I was very impressed with this product's performance. It provides a widespread, powerful spray. I was concerned that this shower head would only provide a gentle downpour, but rest assured it has plenty of power. I would have given this product a 5 star rating if the entire apparatus had been metal. However, only the valve hookup is metal and the rest is 'chromed' plastic. Overall a GREAT buy at 12 dollars.

My boyfriend and I just bought this showerhead for our new apartment, and we love it. It provides a gentle rainshower experience without being TOO gentle - it doesn't take forever to rinse shampoo out of your hair, like I experienced with a different "rainfall" showerhead. The water pressure and width of the spray is perfect. Another added plus is the arm that lets you adjust the height and angle of the showerhead - my boyfriend is over 6 feet tall and now he doesn't have to crouch down to rinse his hair anymore. It was also very easy for him to install - he didn't even need plumber's tape. This is a high-quality product for a very reasonable price.

Very nice. Saw one similar for 2x the price at Home Expo store.

Don't buy this if you have an open base bandsaw measuring 19inches by 30.5inches. This base will not fit that size saw stand. The HTC base I received did not fit my saw and I had to return it. Measure your stand before you order.

The HTC mobile base shown in the Amazon photo holding a Delta open-base band saw is NOT an HRLS-5; open-based-stand band saws won't fit on an HRLS-5. Click on customer photos to see the HRLS-5.

I've owned two HTC HRLS-5 Mobile Bases since the early 1990's. One supports a Delta 28-203 closed-base band saw (precursor to the model 28-248); the other supports a Delta 31-731A Belt and Disc Finishing Machine. This base can support any machine that would fit inside it's base measurements of 16 5/8" x 19 1/4". It could be used for a somewhat larger tool if you raise the tool on plywood above the box frame of the base. In addition, the angled area at the single wheel end provides additional space, especially if the tool to be supported has a rounded base.

Pros:

- Clean, smooth lines due to one-piece frame construction, give the base a custom look. A matter of taste, but I prefer this clean look versus the erector set look of an adjustable-sized tool base such as the HTC2000.

- Have used it for well over a decade with no problems and zero maintenance.

- Tool & mobile base roll about easily.

- Three-wheel fixed-size bases cost less than 4-wheel fixed-sized bases of the same quality.

- Three-wheel bases won't wobble, even if the floor isn't flat. I.e., a four-wheel base would wobble if only three of its wheels touched the floor. If there is a wobble with this base, it's the tool wobbling on the base itself (use shims), not the HTC base wobbling on the floor.

- The tool on the base will be nearly flush with the base rear. As the wheels are on the sides, the rear of the base will be flush with whatever it's next to. E.g., I have two tools next to each other on these bases; they, on their bases, are back to back, so the machines are virtually touching (when not in use), wasting no floor space.

- I have other three-wheel HTC bases, supporting a Delta drill press, sander, and jointer, and they are all excellent. I own six HTC bases and they are all high quality.

Cons:

- Three-wheel bases are inherently less stable than four-wheel bases; i.e., tools on them, especially taller tools, are somewhat more tip-prone. (For the same reason three wheeled ATVs are more tip-prone than their four-wheel cousins.) Some three-wheel bases (but not this one) mitigate this with outboard stabilizers at the two corners by the single wheel.

- This is really minor, but you have to lean over to tighten the plastic-handled wheel lock screws; and to loosen them to roll the tool again. Some bases have a wheel lock operated with your foot, which is more convenient.

The oldest of my HTC bases had the wheel-lock screw poke into the rubber wheel to brake the unit, while newer HTC bases have a flat piece of spring steel between the wheel and screw, to protect the wheel. Both kinds of wheel locks work fine.

This review is meant to provide information to Amazon customers. A previous reviewer mentioned that the HRLS-5 base is for closed base 14" Delta band saws. While that may be the case, it does not apply to all closed base Delta band saws.

I purchased a new Delta 28-206 closed base 14" band saw. After some research I determined that the 3 wheel HTC mobile base that fits this saw is the HTC HRS-8 model mobile base. This base looks like the HRLS-5 but with different dimensions. For some reason this model is not offered from Tool Crib through Amazon, but if you call Tool Crib directly they can order it for you. I am pretty satisfied with the HRS-8. I like the look, durability, and compactness of the 3 wheel base, however I found that the band saw can rock slightly due to the single front wheel. The rocking is very minor and only occurs when you put lateral force on the band saw, but I prefer it to be rock solid on the base. I fixed this problem by placing wood wedges underneath the base on either side of the front wheel. An alternative to the 3 wheel base is the MTC2000 4 wheel base which would probably cure the rocking issue (I use this base on my table saw). Overall I am a big fan of HTC mobile bases and recommend them.

Actually most of this machine is manufactured in China. As a matter of fact, many of Delta's products (especially parts) are now being made in China. This is not a bad thing. I suggest you try not to let your prejudices cloud your judgemnt.

This is a fine sanding station however it is overpriced and you may want to consider a Jet as an equally fine product. BTW, Jet is made in Taiwan.

This is a fine machine, very solid. I have been surprised about how many uses I have found for it. With the appropriate belt or disk, it even works well on light metal work. I have used it to quickly deburr and straighten my wood lathe tool rests. Works like a charm, and much quicker than hand-filing. My only gripe? WHY does it NOT include a dust collection hookup for the disk? The belt sander has a very effective dust port. The disk just has an oval hole in the bottom going nowhere. At first I jury-rigged a way to plumb that hole to the outside world, but then I got mad about having to do so and called Delta. The tech fellow was sympathetic and gave me the part number for the dust collector kit (50-224). But why should I have to pay another $37 for what ought to be a standard item? Well, I paid the $$ and now have a complete machine. And I'm very happy with it.

This machine is the very best of its type and still made in U.S.A. I have used them for over 40 years,and it is always a pleasure.The disapointment is in the way Delta gouges the dedicated Made in U.S.A.customer who has no problem paying for U.S.quality,when said customer goes to buy a dust-collector kit for the 12"disc,that is not included,to match the built in 6"belt dust collector and ends up paying over $... for a few pieces of 3" dia.galvonized tin.What a slam.It should be included,and prior customers be reimbursed.That"s just good business.

You need to use some other criteria to make sure this miter gauge will fit your table besides the manufacturer's claim that "it fits all tables with 3/4" by 3/8" miter grooves". For instance, if you measure the Delta TS200 Shopmaster 10" Portable Bench Saw's grooves, they look to be 3/4" by 3/8"-- however, the 34-779 Miter Gauge does NOT fit this table. My guess is, it fits higher end tables (especially Delta) with these groove measurements. The TS200 is their lowest end table and is probably not made in the same factory as their higher quality saws.

The gauge itself looks great-- it is all metal and the markings and adjustments look and feel high quality. Just make sure it fits first!

This a perfectly good replacement for the original, and if that's all you want, go for it. However, if you want a really good miter guage that does far more than this one, and you don't mind spending a bunch more money for a lot more capable product, try the Osborne EB-3 Miter Guide. It's extremely accurate and has a much longer surface against which to place the wood. If you want perfection and high quality, it's the way to go.

I ordered the Delta 34-779 Miter Gauge from Amazon. Truthfully, for this price, I didn't expect much. First of all, I expected it to be made of plastic. When I received it, I was amazed to find that it was made of metal! Additionally, it fit precisely into the slot of my Delta sander, no play or wiggle at all. Lastly, having stops at 45 and 90 degrees means that I don't have to measure the angle over and over again. I checked out the miter gauge recommended by another reviewer and that one cost five times as much. The Delta 34-779 Miter Gauge does everything that I need at a great price. Highly recommended.

I can't tell if the product actualy removes any odors, but it does an excellent job of masking every odor in the room with it's own very strong smell. If you're looking for something that removes odors without introducing another odor potentially more bothersome, I recommend you avoid this product.

No "odor eliminator", spray, candle, etc. is perfect. This one does the job in eliminating most odors. Make sure to pay attention to the suggestion for the square footage of effectiveness per tub of product. If product scent becomes too strong, close the lid while in the immediate area, then reopen product after you leave. Lasts longer than Air Wizard, Glade, Renuit, and other popular products of this type.

I tried this product first in a motel room which had been a smoking room. Within a few hours it was as fresh as if it were a non-smokers room...and stayed fresh. I next tried it near my multiple cat litter-box. It cut the odor noticeably. This is one of the best, if not the best, products I have used for freshening an area or removing odorous smells.

The saw is powerful, and is just what I wanted. But, I am disappointed with the appearance. The casting at the end of the arm, just under the on/off switch is missing a chunk. This does not reflect good on Delta's inspection practice.

Purchased this from Amazon after my local Delta distributor quoted me a delivered price $450 above Amazon. Box was in good condition upon delivery and the packing done at the factory was well thought out to minimize damage in transit. Setup was easy and alignment was perfect right out of the box.
I used the local distributor for my cabinet saw last year because the price was competitive and I had read all kinds of horror stories about shipping damage/issues for heavy items on Amazon customer reviews. Because of the price difference I took the chance this time and am very satisfied...absolutely no issues with the motor freight. The saw was deliverd to my house on a liftgate truck and the driver had a pnuematic lift and moved it with no problem right into the garage. I haven't been able to give the saw a good workout yet but I cut 40 ft of red oak for some bookshleves and performance is as expected.

This gauge is easy to set up and easy to position. You may have to make a few adjustments to true it all up but, when your finished this thing is rock solid.The T-track system allows you to extend your gauge well beyond the edge of your table for larger pieces.Made with a combination of aluminum and steel this thing is built to last.I do recommend coating the bar with a dri-cote type product if rust is a concern. Now get out there and cut some miters.

This miter gauge has stops which you can be set and will cut exactly on that stop position every time without any slippage. It looks simple but is a very good and precise gauge.

I have a Pro Tech 10" table saw and this Dust hood does not fit. Works great once you make a board to fit your table saw and then attach dust hood to board.

This 14'' table saw dust hood is not the best fit on my platinum edition contractor saw.To fit properly you will need to either make a frame out of sheet metal or plywood to fit under the saw. Then attach the hood to that. Delta does offer adaptor plates (for a charge) that ties it all in very cleanly.That's what I bought.This hood is well made and will accept any 4'' hose no problem. Amazons price on this item is awesome. I've seen it elsewhere for 3 times as much so, buy it here.I do recommend this item it's a real must for anyone concerned about collecting dust and keeping a tidy shop.It can also be fitted to fit almost any shop vac. Now get out there and collect some dust.

Overall I'm impressed with the performance of this drill.

However the belts on the top seem to vibrate a lot, I guess its because they used cast pulleys instead of machined. This is running at the max RPM which I typically do for my type of drilling.

I was hoping this would go away after the break in period but I have used the drill for about 10 months now and still it vibrates a lot. Finally I purchased a powertwist belt which makes this bearable but still not as well as I would expect.

I've had this drill press for about a week now, so this is a fairly brief review. I bought this particular version from a local large home supply establishment. Overall, I'm pretty happy with it.

I carried it home in a VW New Beetle, so it's a manageable package. It came well packed in a sturdy cardboard box lined with foam. I and took it downstairs in pieces, since the whole box is near 180 pounds. It assembled quickly. There are really only 4 parts; the base, the support post, the table, and the motor and belt head. The hardest part was cleaning off the packing grease -- I used kerosene -- and then waxing all the bare metal parts with paste wax.

I measured the runout with my admittedly less than high quality dial indicator and a spare mill bit in the chuck and came out with around .0018" I haven't done any real heavy cleaning of the chuck assembly so there could be some grit or packing gunk inside.

Speed changes are easy by moving a small lever and loosening a thumbscrew. The only thing I'm less than completely happy with is the table assembly. It uses a rack and pinion to raise and lower the table. The rack is held against the post by just a ring up top and it fits into the base at the bottom. There is no support along the length of the rack so there ends up being quite a bit of play in the middle of rack where it sags out away from the post. As a warning to overly harsh treatment, the rack on the display model at the store was severly bent. Also to angle the table, you have to get under it and pull a pin. I haven't tried that yet, but it could have been made easier.

I did try angling the table last night. To me it's a pain, but I don't know how common this method is. You have to remove the pin, which comes out with the use of a wrench, and then loosen a big bolt that holds the table. The bolt is hard to get to being between a couple of reinforcement webs and is large. I think it's a metric just smaller than 15/16". I used a 15/16" socket and it was a little loose, while 7/8" was too small and I don't have a 31/32" wrench to try and my metrics only go up to 17mm. I did see a quick release bolt in another catalog for drill presses that might work.