Milwaukee Reviews

Milwaukee definitely holds the market on this specialty tool. The Deep Cut bandsaw makes it the ideal way to cut pipe, and the weight (as it has a casted shell) does the work for you! There is no comparing the quality and the legnth of life this tool can give you.

I recommend Milwaukee blades, as well. I have tried the PC blades, and those made by Morse and Starrett and have found none to even come close to matching the quality of the Milwaukee.

This is a tool that is built to last, and when it does need servicing, it always comes back to me like new.

I am a residential remodeling contractor, and as such have the need to cut all sorts of materials. In the past, I have relied on the ever present Sawzall (another great tool) for most utility cutting needs. Unfortunately, the one thing that the Sawzall cuts only marginally is metal. While it is possible, the Sawzall leaves a rough, ragged cut, and unless carefully controlled, never a nice straight line. None of this is meant to trash the Sawzall - I couldn't get along without it. However, the Portable Bandsaw adds a dimension to cutting that I never had before.

I have found the Milwaukee Portable Bandsaw to be a highly effective tool that not only cuts much faster than either a Sawzall or a hotsaw, but leaves a much cleaner cut. In use, there is almost no vibration, great ease of control, and with a deep capacity, there is little I can find that this saw can't handle. It also makes for a much safer situation in those instances where I would normally use an abrasive hotsaw - the bandsaw cuts without any sparks, the hotsaw shoots a rooster tail of sparks that will ignite any nearby flammable material. Since most of my work takes place outside a carefully controlled shop environment, no sparks equals greater safety.

The blase is inexpensive and easy to replace. Go get it!

This was my first portable band saw and I could not have chosen a better one. Milwaukee quality screams out every time I use it. I also purchased the optional stand with it. It is expensive, but well worth the extra money. It ensures straight cuts every time. The only caution I would give is to not let the blade bind. If it does, it's usually toast. It will get a waver in it and will not cut right afterwards. Be sure to clamp the material down well.

I have used the Milwaukee model number 6256 jig saw for several years now. It is the best jig saw I have ever used. It is unbelievably smooth. It is so smooth it may be counter balanced as far as I know. The trigger speed control is excellent for precision work. The cutting portion of the blade is highly visibile for accurate cutting. It has plenty of power and is capable of making large thick fast cuts or small precision cuts. It is tough and dependable. I highly recommend this saw for any job requiring a jig saw.

I have always been a huge Milwaukee buff to begin with, and the 6268-21 orbital jig saw did not disappoint. The orbital action cut through lumber with great proficiency. Amazon, as usual was a pleasure to deal with.

I use this saw at my sign company to cut anything. I routinely cut .040 aluminum with no problem. I have also cut rebar with it and still no problem.

The only negative point is it likes to use batteries. I have two on hand because one is always in the charger. I have also cut fence posts with no problem too. Milwaukee makes great tools.
JD

This saw does exactly what it was born to do. Installed 24Ga 5v
crimp on my own home, now we're doing a buddies. Would recomend
finer tooth blade instead of the one that it comes with. Excellent tool almost as good as a cold or shear cut. Thanks Milwaukee.
C.J. Velek
Sebastian,Fl.

You will be happy with the purchase of this saw...it has power,accuracy,ease of use and safety all in one. We are extremely tough on saws and this one has handled every thing that we have thrown at it. The drop foot feature is great and the table is rock solid on the money-all of the time. Milwaukee makes great products.

I have had this saw for 20 years and it is still running great. It will cut through 6x6's with only two passes, one from each side. It will cut 4x4's with a big overlap. I have a Jesada carbide blade in mine now that is a real smooth cutter. I have used lots of other blades over the years, even 7 1/4" in a pinch, but the Jesada is the best.

One caution - make sure you use an extension cord that is rated at or above 13 amps so you won't damage the saw motor. I have always taken this precaution and have never had to rebuild the motor. I use a 10-3 100' cord most of the time. The heavier cord costs less than one overhaul.

I have used DeWalt, Makita, and Milwaukee sawsalls and drills. I think all three make a good product. The thing I really liked about this sawsall and drill is they were easy to use and pakaged together so I only have one case for both of them. I really liked the quick change blade on the sawsall. Both have plenty of power and are comfortable to hold and use. I recomend these tools to anyone who likes a quality product.