Tool Brands Reviews

Drywall screws poke right through the fabric into my flesh. I tried putting a carpenter's pencil in the pocket as in the picture, but it jabs me in the gut every time I bend over. Worse, and completely unforgivable, is the hammer loop. It won't hold itself open, and a rubberized hammer handle will stick to it, forcing you to use two hands to replace your hammer. That appears to be only a temporary inconvenience, though, since the fabric is unravelling and I figure I have about 40 hours longer until the loop completely disintegrates.

I'm going back to the old leather belt.

Product is as show in catalog picture. A very useful item to have when working in the shop.

We have 7 employees here in our small shop in Central Oregon and each of them have this apron. They carry more stuff than you could imagine...and probably more. They are very handy and comfortable. I would recommend them 150%.

Works great. It was a great deal for $10 each when everywhere else had them at about $35-$40.

After looking high and low for a replacement battery for our Black and Decker cordless drill, we finally found this one at Amazon. It charges and holds a charge great, just like the original one. The price is very reasonable, too. We are very happy to finally have a replacement battery.

I have had my Firestorm drill for six years with lots of use around the home and garden. Its dependability and comfort makes me very happy with this tool from B&D. The batteries are just now going after 5 and 6 years respectifully. The drill/driver has been dropped from six feet onto cement and kept on working. A small crack is all that now shows.

As a finish carpenter and contractor I have used this bucket boss for 4 years and it has replaced the tool belt and half the trips to the truck. I am happy to find the 35 pocket ... as I was not able to find it at the big box and hardware stores.

I have a Bucket Boss 35 on a bucket waiting for any task I may need to do. When I have a task, I just throw in any tools, hardware, and small materials I may need for the task and then take it all to the location. (Of course, large materials I have to carry separately.) It's portable and all my things stay organized and easily accessible.

As far as the bucket is concerned, since I don't tend to get things in 5-gallon quantities, I went to the laundromat up the street and got an empty 5-gallon detergent container from them. I figured a bucket from detergent would be clean.

I've had my Bucket Boss for five years and it's held up fine, no damage or failure.

If you don't have a bucket organizer you don't know what you're missing. Whether you have a counter full of cleaning supplies or garden tools a bucket organizer will save you time and keep at least one of your hands free for important things like your cell phone. :P

Bucket Boss is a quality item, and the perfect gift for your unorganized friends and relatives.

I use my gaurd everyday in a lumber yard. I carry a tin snips, marker, pens, knife etc... and this little thing works wonders. However, since I am jumpin in and out of forklifts all day I cant use it with my back pockets and the handle to the snips poke me in the stomach if I put it in the front pocket so I wear it on my side. When I do this and the pouch gets snagged a little bit on something it tears away off my belt due to the snap belt enclosure or the weight of my tools itself will do the same. Somebody said they wished it had a clip but I have used that system on the knife sheath and it has its problems. So I would say they need a slide through beld system like on their leather goods.

Excellent product, well made with plenty of storage space BUT there is no stainless steel belt clip

Im a service electrician, so i do small jobs all day long and in between im in the truck driving to the next job ,so i put tools on, put tools away all day long. I got tired of putting holes in my back pockets by carring screw drivers ect.. my regular tool pouch is big and hangs on my belt so it was too much of a pain to undo my belt when i arrive and then again when i leave. This baby solved that problem. I ended up using it in my front pocket, more comfortable and excessable. It did wear out in 8 mo.'s so im ordering a new one. if they beefed up the bottom of pouch so screwdrivers wouldn't eventually pop through i'd give it 5 stars.

Perfect size for 20' 4Ga. cables. Keeps them coiled and compact for storage behind seat or in trunk.

Just what I hoped it would be. Fits my heavy gauge (10g? x 14ft) with a little room to spare.

I put a set of professional 2-gauge, 20 foot long jumper cables in this little bag, and they fit fine. If those will fit, any other cables will too.

The cloth is thick enough to resist snagging and tearing, and has a small outside pocket for something very tiny (the pocket is too little for anything big). Compact, and fits well in the trunk, yet sturdy enough for the weight of the cables. Very good, as long as you aren't planning on putting too much else in there. A set of rubber gloves, wipes, and small flashlight might fit, but nothing big.

This is a very well designed tool belt. You can move the modules around to fit our own needs. The nylon parts are nicely made, but the plastic clip is not durable. After about three weekend of use, one of the piece already broke off. I replaced it with a metal belt buckle.

This product is nice because of its adaptability. You only need to lug around what you need and not a bunch of empty flapping pockets. It is also nice to be able to vary the position of the pouches and hammer. The belt is nice and comfortable, with good but not exessive padding and the material is practically indestructable and wearproof. It doesnt get easily soaked with water or sweat either, which is nice. Of course, when brand new the belt is a bit stiff, but it wears in quickly and hangs very comfortably.

I looked at a lot of tool belt/builders rigs. For the price I do not think I could find a better rig. It keeps every thing I need right were I can reach it fast and easy. A real life saver when working up off the ground. I bought one for myself and one for my helper. We were able to do a lot more work . By haveing the tools we need right when needed.

Internet transactions require communication to create the trust necessary to succeed. This company does not have it. They are hard to reach and do not return phone calls.

I ordered several LED items from Quality Online after talking with their phone representative. He assured me everything was in stock and would ship the next day. They immediately debited my VISA account, sent an email noting the order, then nothing. After 5 days I called and was told that one of the items was not in stock, and he could not give me a definitve date when it would be. I asked why I was not notified.... no answer.

He was going to "check it out" and call me back. He did not. I left two more messages and sent an email. Nothing.
I sent an email telling them to cancel the transaction and return the money to my account, at this point, they have not re-embursed my account.

This is totally unprofessional behaviour. My advice, shop somewhere else.

THIS IS A VERY BRIGHT L.E.D. AND LOOKING AROUND IT FOR A LITTLE WHILE GAVE ME A HEADACHE AND TRUST ME NO ONE WANTS TO LOOK INTO IT WHEN YOU SHOW THEM THE INTENSE LIGHT. HERE IS THE ONLY PROBLEM I SEE. WHEN YOU PUT FRESH BATTERIES INTO THE MAG 3D , YOU HAVE TO WATCH THAT THE METAL HOUSING OF THE LED DOESNT COOK ITSELF INSIDE. IT GETS SO HOT THAT THE REFLECTOR (BIG THING THAT REFLECTS LIGHT) CAN GET DISCOLORED AND LOOSE ITS REFLECTABILITY. ITS BETTER TO RUN BATTERIES THAT HAVE BEEN USED RATHER THAN BUY BRAND NEW ONE....TAKE MY WORD FOR IT. MOST MAG LIGHTS, ESPECIALY MINE 3D, DONT HAVE MUCH HEATSINKING BUILT INTO IT. WISH THEY CAN GO BACK TO THE DRAWING BOARDS. *******************************THE TRUTH IS DONT BUY AN LED BULB ESPECIALY 3-5 WATTS IF IT CANT DISIPATE HEAT....IN THIS CASE MAG IS "NOT" DESIGNED FOR THIS BULB.....BUT DONT GET ME WRONG. IT IS VERY VERY VERY VERY BRIGHT. DONT LOOK INTO IT OR YOU CAN LOOSE YOUR VISION.********************************

I purchased this product almost a month ago. I got found this bulb from flashlightreviews.com and it was rated 4 stars. It's well worth the money to upgrade your stock Mag light. After installing the bulb I went out in my back yard to see what I could light up. I was amazed just how bright my 3D mag is compared to the stock bulb. I would recommend this any day if someone is looking for an easy upgrade.

I really had a difficult time finding this item in stores, but when I checked with Amazon I found it quickly and received it just the same. Thanks!

Couldn't find a 9.6 battery anywhere, but Amazon had it and much cheaper then I expected. Came faster then I thought. David

As the title would imply, I needed a battery for 9.6V Quantum
series drill. Even though this battery is listed for the Firestorm series, it fits & performs perfectly in Quantum series.
The price was so good I bought a pair & the shipping was the same
as for one. So, I'm a happy camper!

This item is identical to the Bucket Boss Brand 06009 Jumper Cable and Extension Cord Bag which is $5 cheaper at $14.99. I bought both because I wanted a bigger and smaller bag and assumed that this item was, indeed, bigger but it was not. This item is marked "big" where the other is not and is $5 more than item #06009 so I was surprised when they arrived and were IDENTICAL (not similar but exactly the same). After a couple of complaining emails I was given a refund of $5 for each of the 2 of this item I bought.

In short, save $5, get the Bucket Boss Brand 06009 Jumper Cable and Extension Cord Bag instead!

Just got my Cable Bag last night and I was really worried it was going to be too small for my giant, 25 foot long jumper cables but they fit perfectly!

I have two 35' 10/3 cords with giant plugs on each end. These are extension cords that I made to remotely charge my Electric Vehicle at 220V and 30A. These are big, fat cords. I purchased two of these bags thinking that I'd need one each for the two cords. Wrong. Both of my cords (70' total, plus four giant plugs) all fit in one bag easily.

The construction of these couldn't be better. The zipper is huge and rugged (and goes both ways). The most important part is that the zipper goes about 80% of the way around the bag, so loading the bag couldn't be simpler. The bag opens completely like a clam-shell - you set the cord on the bottom half, and flip the top half back over and zip it around. I thought [the money]was a lot to spend on a bag like this, but I couldn't be happier with the purchase. I'd much rather buy something of quality that I don't have to worry about a few years down the road.

Great product!

I bought and love the Bucket Boss, but I immediately found the need for something like this product, since it was quite painful to carry a bucket loaded with tools even a short distance. I decided to write this review when I was that with shipping the cost will be $14.98. Here is my solution:
Buy some foam pipe insulation tubing (it usually has one side at least partially slit). Cut the tubing to the length you want for your handle. Secure the tubing with ratchet ties (and trim the so that the excess tab is removed). Finally cover the tubing and ratchet ties in duct tape. Even if you have to buy all of these items it should cost you less than buying this handle. You'll also have some pipe insulation, ratchet ties, and duct tape to use on other projects. I made my handle over a year ago and with regular use it still holds up.

This product may seem minor in nature but it is a required feature if you are putting together a Bucket Boss organizer - in my opinion. The size of the grip allows for comfortable gripping of an otherwise too small (at least for my hands) bucket handle. The standard grip on the bucket isn't practical for long hauls, but with this grip you can carry a heavy load considerably further without fatigue. Get one.

This product is so useful I have bought several as gifts for others. No shortage of pockets and when you get to that job around the house or farm you will have EVERYTHING you need - no more trips back to the shop!